Commit b5510430 authored by aloz77's avatar aloz77

Add frewe-client.cfg

parent c61d4960
#######################################################################
# Freetz Weather Client (frewe-client) for FRITZ!Box Configuration File
# Alexey Ozerov (c) 2015 - ver. 1.19
# All settings are optional, all lines beginning with # are comments
#######################################################################
#######################################################################
# Weather station related settings
#######################################################################
# Weather station type
# Set to WH3080 for WH3080 and WH3081, keep WH1080 otherwise
StationType WH1080
# Weather station altitude in meters for relative pressure calculation
Altitude 50
# Set RunInterval in seconds in order to run frewe-client continuously
# Less then 48 seconds is not reasonable as the last reading updated every 48 secs
RunInterval 300
#######################################################################
# frewe-server settings (OPTIONAL)
# Remove the heading # to enable and set your settings
#######################################################################
# Full URL of frewe-server.php
#FreweServer_URL http://www.domain.com/path/to/frewe-server.php
# Server key as defined in frewe-server.php
#FreweServer_Key your_server_key
# Send weather data to frewe-server, set On to enable
#FreweServer_SendData Off
# Resend missing weather data, set On to enable
#FreweServer_Resend Off
# Send all kind of errors to specified email address (requires frewe-server to be configured)
#Error_Email name@domain.com
#######################################################################
# Configuration of known weather services
# Register for the weather service in order to use it
# Set WSWIN Direkt Link in Datenuebernahme in Awekas Configuration
# Remove the heading # to enable service and set your settings
#######################################################################
#WUnderground_StationID your_station_ID
#WUnderground_Password your_password
#PWSWeather_StationID your_station_ID
#PWSWeather_Password your_password
#Awekas_Username your_username
#Awekas_Password your_password
#METOffice_SiteID your_site_ID
#METOffice_SiteAuthKey your_auth_key
#Wetter.com_Username your_username
#Wetter.com_Password your_password
#Wedaal_Username your_username
#Wedaal_StationPass your_station_pass
#Sauerlandwetter_StationID your_station_kennung
#Sauerlandwetter_Password your_station_password
#WetternetzSachsen_UserID your_user_id
#WetternetzSachsen_Password your_password
#######################################################################
# Sensor calibration (ADVANCED)
# value = sensor * factor + offset
# Offsets are in C, hPa, km/h, mm, lux
#######################################################################
TempInFactor 1.0
TempInOffset 0.0
TempOutFactor 1.0
TempOutOffset 0.0
HumidityInFactor 1.0
HumidityInOffset 0.0
HumidityOutFactor 1.0
HumidityOutOffset 0.0
PressAbsFactor 1.0
PressAbsOffset 0.0
WindspeedFactor 1.0
WindspeedOffset 0.0
WindgustFactor 1.0
WindgustOffset 0.0
WinddirOffset 0.0
RainFactor 1.0
RainOffset 0.0
IlluminationFactor 1.0
IlluminationOffset 0.0
UVFactor 1.0
UVOffset 0.0
#######################################################################
# Additional URLs of services to submit the weather data to (ADVANCED)
# Run "/var/media/ftp/frewe/frewe-client -h" for the full list of vars
#######################################################################
# WeatherURL http://www.domain.com/path/to/service.php?action=updateraw&ID=YOURID&PASSWORD=YOURPWD&dateutc=%n&winddir=%d&windspeedmph=%w&windgustmph=%g&humidity=%H&tempf=%o&dewptf=%e&baromin=%l&indoortempf=%i&indoorhumidity=%h&rainin=%s&dailyrainin=%t&softwaretype=Freetz%%20Weather
#######################################################################
# Output format and error string (may be empty) (ADVANCED)
# Run "/var/media/ftp/frewe/frewe-client -h" for the full list of vars
#######################################################################
# Full output string with metric units
# OutputFormat time: %N\nage %a min\nin humidity: %h %%\nout humidity: %H %%\nin temperature: %I C\nout temperature: %O C\ndewpoint temperature: %E C\nwindchill temperature: %C C\nwind speed: %W km/h\nwind gust: %G km/h\nwind direction: %D\npressure: %P hPa\nrel. pressure: %L hPa\nrain total: %R mm\nrain 60 min: %S mm\nrain since 0h: %T mm\n\n
# Full output string with english units
# OutputFormat time: %N\nage %a min\nin humidity: %h %%\nout humidity: %H %%\nin temperature: %i F\nout temperature: %o F\ndewpoint temperature: %e F\nwindchill temperature: %c F\nwind speed: %w mph\nwind gust: %g mph\nwind direction: %D\npressure: %p in\nrel. pressure: %l in\nrain total: %r in\nrain 60 min: %s in\nrain since 0h: %t in\n\n
# Use this output format if your want to log the data in a local CSV file
# OutputFormat %N;%I;%O;%h;%H;%L;%W;%G;%d;%S;%T\n
# Empty output for silent run, keep it
OutputFormat
ErrorString N/A
#######################################################################
# Output format and file for FHEM integration (ADVANCED)
# Use this command to add your weather station to FHEM
# define myWH1080 WS3600 "cat /var/media/ftp/frewe/fhem.txt" 300
#######################################################################
#FHEM_File /var/media/ftp/frewe/fhem.txt
#FHEM_OutputFormat DTime %N\nTi %I\nTo %O\nRHi %h\nRHo %H\nDIR %d\nDIRtext %D\nWS %W\nWG %G\nRtot %R\nRP %L\n
#FHEM_ErrorString
#######################################################################
# Alarms (ADVANCED)
# Get URL, run command or send eMail if threshold value is reached
# Run "/var/media/ftp/frewe/frewe-client -h" for the full list of vars
# You can enable up to 20 alarms and use each alarm type more than once
# Alarm_Email require frewe-server to be configured
# Thresholds are in C, hPa, km/h, mm, lux
# Helpful commands for Fritzbox:
# echo "ATDT123456" | nc 127.0.0.1 1011; sleep 2; echo "ATH" | nc 127.0.0.1 1011 # Ring Phone Number 123456
# ether-wake 00:11:22:33:44:55 # Wake up a device on specified MAC address
# echo "Email content" > /var/tmp/frewe.txt; mailer -t email@address.com -s "Email subject" -i /var/tmp/frewe.txt # Send email by Fritzbox, push service must be configured
#######################################################################
#HighOutdoorTemp 20.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowOutdoorTemp -20.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighWindchillTemp 40.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowWindchillTemp -40.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighDewTemp 40.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowDewTemp -40.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighIndoorTemp 40.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowIndoorTemp 10.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighOutdoorHumidity 100
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowOutdoorHumidity 10
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighIndoorHumidity 100
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowIndoorHumidity 10
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighRelPressure 1050.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowRelPressure 950.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighWind 50.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowWind 0.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighGust 100.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowGust 0.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighRainHour 10.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowRainHour 0.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighRainDay 100.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowRainDay 0.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighIllumination 100.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowIllumination 0.0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#HighUV 100
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
#LowUV 0
#Alarm_Get http://www.domain.com/path/to/service?query
#Alarm_Run /path/to/command args
#Alarm_Email name@domain.com
# END OF FILE
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment